Heel Shrouds

Heel Shrouds, heel blocks, CORNER HEEL SHROUD, WELD-ON BUCKET HEEL SHROUDS For Caterpillar Excavators, WELDED HEEL SHROUD for shovel buckets, dragline buckets, wheel loader buckets, and underground LHD buckets. Weld-on corner shroud, Corner guards or corner castings

The heel shrouds (or heel blocks) are designed to suit overhang of either wall or floor plates on buckets and to comfortably allow for 6 run weld pass. Our heel shrouds are hard wearing and unbeatable value per kg of wear material.

Weld-on shrouds to protect the joint between the sides and base of the bucket in the case of severe abrasion.
Increases component life and reduces operating costs.
Weld-on Heel Shrouds protect high wear and impact locations on a bucket, protecting the equipment.

Part Details & Features
The corner heel shroud overlaps the joint between floor and sidewall to protect the critical high wear area of the bucket.
Curved to the bottom of the bucket for a proper fit.
Bulbous corner for increased material in high wear area.
High alloy steel for resistance and weldability.

Cast corner heel shroud will protect your bucket corner edges from aggressive wear that could result in premature bucket failure. These shrouds will help prolong the wear life of your bucket in most construction and mining applications.
Features and Benefits
Shrouds are cast of low alloy steel for excellent wear resistance
Multiple styles for excavators, wheel loaders, face shovels and LHD scoop tram buckets
Easy weld-on installation