(1) Place the bucket on a flat surface.
(2) Remove the double nuts from the locking bolts of each pin on the stick and connecting rod, remove the bolts, and then remove the stick pin and connecting rod pin
(3) Reverse the bucket, after reversing the bucket, align the bucket and connecting rod with the pin hole, align the mounting hole of the bucket and connecting rod, then align the connecting rod with the mounting hole of the bucket, and install the bucket.
(4) Align the stick with hole 1 and the connecting rod with hole 2, then apply lubricating grease and install the stick pin shaft and connecting rod pin shaft. When installing in reverse, do not install the O-ring and keep it in a safe place for future use.
(5) Install locking bolts and nuts on each pin shaft, and then apply lubricating grease on the pin shaft.