At present, there are two basic structural forms that are relatively complete and widely used: the four link structure with non adjustable loosening angle and the four link structure with adjustable loosening angle.
The four link structure with an adjustable loosening angle is a statically indeterminate structure, with relatively high overall strength, balanced force distribution among various components, and good impact resistance. However, only the lifting hydraulic cylinder is used without tilting the hydraulic cylinder, and the movement trajectory of the tooth tip is basically fixed. During the loosening process, the loosening tool support angle can only move up and down, and the loosening angle of the tooth tip cannot be adjusted, which cannot meet the different requirements for the loosening angle when the tooth tip is in contact with soil and when loosening soil. Due to the fact that the working objects of the loosening device of large bulldozers are various working surfaces with different hardness, such as clay, salt mines, permafrost, and rock layers, the requirements for the loosening angle of the loosening device are different under different working conditions. Therefore, the scope of use of this structure is limited to a certain extent and is only suitable for small and medium-sized bulldozers.















